31 December 2011

redsn0w 0.9.10b3 for Windows, no version check (if above version doesn’t work)

redsn0w 0.9.10b3 for Windows, no version check (if above version doesn’t work)
跳过检查版本信息,如果前两个不工作

29 December 2011

redsn0w 0.9.10b3 发布

Update #3: The b3 version of redsn0w fixes a problem where re-running redsn0w over an existing jailbreak would cause MobileSubstrate-based apps to stop running until MS was installed again.  Now you can re-run the redsn0w jailbreak step without worrying about that (but still remember to de-select the “Install Cydia” option if it’s already installed).
TIP: If auto-detection fails and redsn0w tells you no identifying data was found, you can always pre-select the appropriate 5.0.1 IPSW using “Extras->Select IPSW”.
 
升级3:  解决重新运行redsn0w 的jailbreak 而导致Mobile Substrate不能运行直到重新安装MS的问题。

28 December 2011

redsn0w 0.9.10b2 发布,iOS 5.0.1 完美越狱 解决launchctl问题

Update #2: The b2 version of redsn0w includes the launchctl-related fix by @planetbeing as mentioned by @saurik here and here.  As usual, you can just re-run redsn0w in jailbreak mode over your existing 5.0.1 jailbreak (even a PwnageTool one), making sure to de-select “Install Cydia” if you do.  Always be sure to do a controlled “slide to power off” shutdown of your device before running redsn0w.
Here are the redsn0w download links:
b2解决了launchctl问题,saurik以前提到过,重新运行redsn0w的jailbreak模式,PwnageTool同样可以,反选Install Cydia,运行redsn0w前先关机
下载地址

PwnageTool_5.0.1. 发布,完美越狱5.0.1

下载 PwnageTool_5.0.1.dmg

去除基带,自制固件,仅限Mac系统,不支持A5

27 December 2011

Redsn0w 0.9.10b1 发布 iOS 5.0.1 完美越狱


原地址: 
https://sites.google.com/a/iphone-dev.com/files/home/redsn0w_mac_0.9.10b1.zip
https://sites.google.com/a/iphone-dev.com/files/home/redsn0w_win_0.9.10b1.zip
 
国内下载: 
下载:redsn0w_win_0.9.10b1.zip

下载:redsn0w_mac_0.9.10b1.zip
 
 
Windows版用管理员模式运行
 
@pod2g has created a terrific gift for iOS fans — an untethered 5.0.1 jailbreak for non-A5 devices!
Many of you have already been following @pod2g’s blog where he’s been keeping everyone up to date on his progress.  And so you know that he recently decided to push the button on a release for all devices except the new iPhone4S and iPad2.  @pod2g’s untether involves two separate exploits and a few other “tricks” — and since he’s taken the @comex approach of doing nearly everything himself, you know his plate has been full these past few months!
A few days ago, @pod2g gave the untether to both the iPhone devteam and the chronic devteam.  We’ve put it into redsn0w 0.9.10 and PwnageTool, and the chronic devteam put it into a Cydia package (the same set of exploits is in all three).
Here are the basic steps for how to get it:
  • The untether is for iOS 5.0.1 on iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G
  • If you have one of those devices and are not on 5.0.1 yet, update now!  The SHSH window is still open for 5.0.1  If you unlock via ultrasn0w or gevey, make sure you only get to 5.0.1 via a custom IPSW!  See the guides at places like iClarified.com if you don’t know how.  Once you’re at 5.0.1, use the latest redsn0w 0.9.10 to both jailbreak and untether.
  • If you’re already at 5.0.1 with a tethered jailbreak, you have two choices: either run redsn0w 0.9.10 over your current jailbreak (deselect “Install Cydia” if you do that), or install the Cydia package prepared by the chronic devteam.  The patches are the same regardless of which you choose.
  • Some of you are using a hybrid 5.0/5.0.1 configuration.  If so, do not attempt to install this untether over that setup!  You will most likely get into a reboot cycle.  Do a sync and fresh restore to 5.0.1 then install the jailbreak + untether.
As mentioned earlier, @pod2g has spent months working on all the exploits and tricks in this untether, and many of you may be wondering how you can send donations.  Although the iPhone devteam itself doesn’t take donations, we thought it was appropriate to provide a link at the end of the redsn0w run for you to more easily donate directly to @pod2g if you wish (alternatively, you can go right here).  There’s a link in the Cydia package for donating to the chronic devteam for the Cydia version of @pod2g’s untether.
@pod2g is now looking for a way to extend this to A5 devices.  Because those devices cannot use geohot’s limera1n exploit to inject the untether, they require exploits above and beyond those used for this release.  Keep following pod2g on twitter or his blog for any progress reports!
Here are the redsn0w download links.  These links are temporary, do not permalink them yet!

24 December 2011

TinyUmbrella 5.10.02 发布,下载

Apple TV 4.4.4 support

I've updated TU for AppleTV 4.4.4 support. Sorry for the delay! Busy during the holidays :)

Apple TV 4.4.4的支持 


21 December 2011

[下载]iFaith 1.4.1 发布

-------------------------------------------
       iFaith v1.4.1 Release Notes:
-------------------------------------------
* Added Apple TV 4.4.4 (9A406a) support.
支持 apple tv 4.4.4
* TinyUmbrella iOS 4.4.x/5.x.x blobs are now accepted.
可以使用tinyumbrella ios4.4.x和5.x.x的shsh文件
* Resolved rare DFU detection issues.
解决进入DFU后的问题
* Resolved issues with 8GB iPhone 4 Models.
解决iphone 4 8G版本问题
* Resolved iPhone 3GS issues with factory certificates/Error 21
解决iphone 3gs 恢复系统时 验证问题   itunes 21错误
  that occurred during restore.
* Resolved iOS Detection issues.
解决iOS 识别问题
* Removed kill-switch that accidentally got distributed in
  iFaith-v1.4's public release.
删除 iFaith 1.4的支持

* Don't expect A5 device support until a DFU bootrom
  exploit is publicly available.
不要期待A5设备的支持,直到可以解决bootrom问题

* Thanks to JKjeepnJeff & JPWest for their contributions
  to this release! :)
感谢jkjeepnjeff和jpwest的帮助
-------------------------------------------
    Now available at: http://iH8sn0w.com
-------------------------------------------
Tweet any bugs via twitter to @iH8sn0w

// iH8sn0w

下载地址

20 December 2011

redsn0w 0.9.9b9d 发布,下载

Update #17d: iPhone3GS owners in our comments section below noticed a problem with the untethered jailbreak available for the old-bootrom 3GS. We’ve corrected that problem in 0.9.9b9d. If you have an old-bootrom 3GS and have already used last night’s redsn0w on it, you can re-run it again without losing anything. Just use this new version, go to Extras->IPSW and manually select the 5.0.1 IPSW, then go back and Jailbreak it again (but you can uncheck Cydia because it’s already installed). This is still a tethered jailbreak for all except old-bootrom 3GS users.

3GS带旧版bootrom可以完美越狱,在5.0.1,只要选择extras->IPSW选择 5.0.1的固件,然后重新越狱就可以,不用选择安装Cydia 


Here are the download links:

19 December 2011

redsn0w 0.9.9b9b 发布,下载

Update #17: The holiday season is almost here (Happy Holidays!) so we realize everyone is busy (especially @pod2g!).  And even though we always recommend that jailbreakers stay where they are until a new untethered JB comes out, that’s not always possible.  So we’ve updated redsn0w for those who may have found themselves at iOS 5.0.1, and added some other useful features too:

更新17: 这个假期。。。。。。懒得翻译然后就pod2g制作的iOS 5.0.1完美越狱差不多了,Redsn0w等不及pod2g出iOS 5.0.1,先给一些原生就是5.0.1的朋友一个不完美越狱,然后新增加一些功能。
  • native support for 5.0.1 (no need to point redsn0w at 5.0 IPSW or use command-line args).  Support automatically extends to all of redsn0w’s various functions: “Jailbreak”, “Just boot”, “Fetch blobs”, “Stitch blobs”, “Recovery Fix”
原生支持5.0.1(不需要选择5.0固件或者命令行) 支持越狱,引导,获取shsh,修复恢复模式
  • iBooks fixed in 5.0 and 5.0.1.  This is a targeted fix that doesn’t remove entire sandbox mechanism.  5.x users already using redsn0w “Just Boot” can just use the new version without redoing entire jailbreak again
修复5.0和5.0.1的iBooks打开问题,并不是移除沙盒修复。5.x用户已经越狱的值需要重新引导解决问题,并不用重新越狱。
  • 3GS old-bootrom owners can now create custom IPSWs without blobs
3GS旧版bootrom 不用shsh可以创建自制固件
  • ultrasn0w compatability update (i.e. same baseband requirements) for 5.0.1 will be available on Cydia Monday
周一Ultrasn0w支持5.0.1 但是还是原先基带
  • support for newer 8GB iPhone4 (which until now had problems with “Fetch blobs”).  Thanks to @JKjeepnJeff for loaning us one of these newer i4 units for testing!
支持8G版本iPhone 4的shsh获取,感谢@JKjeepnjeff借给我们新的iphone 4测试
  • allows Windows users (not just OS X users) to use the “Custom” button to create IPSWs without baseband updates.  (Update: please wait for 0.9.9b9b for this!)
支持Windows用户,不仅是 Mac用户,自制固件,并去除基带(更新:等待0.9.9b9b的支持)
  • accommodates APTickets in 5.x (until next Apple countermove).  APTickets are crypto-verified before submitting to Cydia, just like the main blobs.  Cydia server support for sending back the APTickets is upcoming.  For now, use stitched IPSWs for 5.x.  Due to APTickets, stitched 5.x IPSWs now require user to start in “Pwned DFU” mode
Cydia将会支持APtickets的保存,目前获取APticket的SHSH要进入DFU模式
  • Support added for stitching 4.x blobs to iPad2-GSM IPSWs.  Similar to @notcom’s TinyCFW but doesn’t require lots of RAM or a TSS-assisted restore. Won’t work for iPad2 5.x blobs (or iPhone4S at all) until a bootrom-level exploit is out
支持iPad2 GSM降级到4.x的系统,和TinyCFW原理相似,但是不用2.5G内存,或者TSS协助降级,不支持iPad2 5.x的shsh降级也不支持iPhone4s 直到bootrom解决
  • top line now shows whether (and where) a redsn0w update is available, or if the version being run is the latest.  Uses DNS TXT record to alleviate any concerns about snooping
Redsn0w会显示是否有新版Redsn0w
  • no 5.1 beta support at this time (major apps like Cydia are not yet compatible)
不支持5.1beta系统的越狱
  • @pod2g has been doing a great job porting his 5.x untether…check his blog for updates!
Pod2g已经很努力的去制作 5.x的完美越狱 查看他的blog
  • Owners of newer 3GS iPhones must not flash the iPad baseband.  The iPad baseband will not work on 3GS iPhones built later than 2011 week 35.  You have a week 35 or later device if your serial # starts with xx135.
最后一条没理解什么iPad 基带不工作在3GS 35周后的机器什么的,序列号开始xx135

Update #17b: Version 0.9.9b9b enables the “Custom” button for Windows users, and make the 3GS week 35 warning a more explicit part of the process.
 
0.9.9b9b支持Windows用户制作35周后的3gS 自制固件,
 
Update #17c: For those Windows users encountering launch errors due to the self-update check, please use this version instead for now: 
This is still a tethered jailbreak for all except old-bootrom 3GS users.

旧版bootrom 的3GS用户是不完美越狱
Here are the download links:

7 December 2011

iFaith 1.4版本发布

下载地址
http://hotfile.com/dl/136741009/55e717e/iFaith-v1.4_win.zip.html
支持 5.0.1 到3.x.x的降级